Transport & public spaces · Venues & Events
Know the crowd before it becomes the problem.
Stadiums, arenas, and exhibition centres fill and empty in minutes. Camnitive measures crowd density, queues, and occupancy live. It checks egress routes and restricted areas. The control room sees it all in one view.
In venues & events
What goes wrong today.
Crowds build faster than radios report
Density in a concourse or at a gate can turn in minutes, and the control room hears about it last.
Queues cost revenue and patience
Long waits at gates and concessions mean missed kick-offs, lost sales, and complaints that arrive after the event.
Egress plans assume clear routes
Exit routes are checked on walk-rounds, then blocked by vehicles, stalls, or crowds before anyone notices.
Detect · Step 1 of 4
What the cameras watch for.
One FloFrame per venue, sized to the camera count, with Control Tower as the control-room view.
Sealed evidence
Metrovale Central
Demo footage, annotated the way FloFrame does. Each card appears as its alert is raised.
Crowd density
People per zone in concourses, stands, and forecourts, against your thresholds.
Entry & concession queues
Queue length and wait at gates and concessions, live and per event.
Occupancy limits
Live counts in halls and sections against their permitted capacity.
Egress readiness
Exit routes checked clear of parked vehicles and standing groups before doors open.
Restricted areas
Backstage, pitch-side, and plant rooms flagged on unauthorized entry.
Event-day reporting
Arrival curves, peak density, and queue times compared event by event.
Rules
Rules you would run.
Written in plain words, run on site, checked by a vision model before anyone is alerted.
Crowd density
“Alert when the north concourse passes 2 people per square metre for 1 minute”
Then: SAFETY OFFICER ALERTED · ZONE LIVE
Open in the Rule PlaygroundEntry queues
“Notify gate control when the Gate C wait passes 10 minutes”
Then: STEWARDS REDEPLOYED ✓
Open in the Rule PlaygroundRestricted areas
“Flag any entry to the pitch-side area during play”
Then: SECURITY PAGED · CLIP SEALED ✓
Open in the Rule Playground
Measure · Step 2 of 4
Every alert becomes a number you manage.
What FloFusion measures for Venues & Events, per zone, per site and over time.
Platform-edge dwell
Time people stand on the edge strip, highest as trains arrive.
Concourse density
People per zone against its limit, minute by minute.
Gate throughput
People through each gate line, in and out, by hour.
What a pilot sets out to move
- from threshold to control room
- Seconds
- pilot target on covered zones
- shorter peak concession waits
- 20–30%
- typical pilot target after layout changes
- exit route checked before doors
- Every
- pilot target on covered routes
Pilot targets agreed with you up front, not past results.
Comply · Step 3 of 4
Proof that holds up with auditors.
The rules that apply to Venues & Events, scored continuously from camera evidence, with a signed record anyone can verify.
EU AI Act
AI used for workplace monitoring and safety is high-risk: you must run risk management, keep event logs, maintain technical documentation, and guarantee human oversight and accuracy monitoring.
GDPR
Video of people is personal data: you need a lawful basis, data minimization, retention limits, and a DPIA for systematic monitoring of workspaces.
UK GDPR and Data Protection Act 2018
Video of identifiable people is personal data: you need a lawful basis, transparency, data minimisation and retention limits, and a DPIA before systematic monitoring of staff.
ICO guidance on monitoring workers
Monitoring must be necessary, proportionate and open: tell workers what you monitor and why, consult them, choose the least intrusive means, and avoid covert monitoring.
Improve · Step 4 of 4
What to change next.
The process map shows where crowds build and how people move against the flow.
Marshals on the platform at peak
Staff the edge strip in the minutes before trains, when dwell peaks.
Reverse a gate at the morning peak
Open a second inbound gate between 08:00 and 09:00, where wrong-way walking starts.
Examples of what a pilot’s process map points to.
Getting started
A pilot on the cameras you own.
Prove live crowd, queue, and occupancy measurement at one venue over a series of events.
Scope
- Gates and turnstile approaches (entry queues and arrival rates)
- Concourses, stands, and forecourts (crowd density against thresholds)
- Concession stands (queue length and wait)
- Exit routes, backstage, and plant rooms (egress readiness and restricted areas)
We configure
- Zones, lines, and density thresholds per area, with event-day schedules
- A Control Tower view for the control room, with live counts per zone
- Routing to safety officers, stewards, and security, through Teams, Slack, or webhooks
- Post-event reports in Insights: arrival curves, peak density, and queue times
You walk away with
- Time from a density threshold being crossed to control-room awareness
- Peak entry and concession waits per event
- Occupancy against permitted capacity, per section
- Exit routes confirmed clear before doors open
Questions
Venues & Events: common questions.
Can it measure crowd density in real time?
Yes. Zone occupancy and line counts update live, and rules alert when a zone passes your limit. The control room sees every zone in Control Tower.
Link to this questionDo you identify people in the crowd?
No. Camnitive counts people anonymously; it does not use face recognition or biometrics.
Link to this questionDoes it replace our safety management or stewarding plan?
No. It gives your safety officer live numbers and alerts to act on. Decisions stay with your team and your event safety plan.
Link to this questionCan we compare one event with another?
Yes. Insights keeps arrival curves, peak density and queue times per event, so you can see whether a gate change made a difference.
Link to this questionWill it cope with tens of thousands of people?
Density and counts are measured per camera and zone, then combined across the venue. The pilot sizes the FloFrame hardware to your camera count.
Link to this questionDo we need new cameras?
No. Camnitive works with RTSP and ONVIF cameras, including the ones already covering your gates and concourses.
Link to this questionSee it on your own cameras.
A demo on footage from an operation like yours, then a pilot on the cameras you own.