Logistics & warehousing · Warehousing
Forklifts and people, kept apart on the cameras you have.
Forklift/person proximity, dock utilization, aisle safety, plus congestion and yard visibility analytics on the cameras already covering your sheds.

In warehousing
What goes wrong today.
Forklift near-misses never make the report
The incidents you record are a fraction of the conflicts that happen. The pattern stays invisible until someone is hurt.
Blocked exits are found at audit time
Egress routes and aisles drift blocked during every peak, discovered by inspectors, not by your team.
Ops metrics come from clipboards
Dock dwell, door utilization, and congestion are measured by walking the floor: sampled, stale, and disputed.
Detect · Step 1 of 4
What the cameras watch for.
Runs against your existing VMS across DCs: one FloFrame appliance per ~12 cameras, live in days.

Sealed evidence
Halden Freight Park
Demo footage, annotated the way FloFrame does. Each card appears as its alert is raised.
Forklift–pedestrian proximity
The highest-severity warehouse risk, watched continuously.
Blocked exits & aisles
Egress and aisle discipline enforced automatically.
Dock utilization
Dwell time and door utilization measured from existing cameras.
Congestion heatmaps
Find the choke points slowing your shifts.
After-hours intrusion
Perimeter and interior security when the site sleeps.
Yard visibility
Trailer, gate, and yard state without a yard walk.
Rules
Rules you would run.
Written in plain words, run on site, checked by a vision model before anyone is alerted.
Forklift proximity
“No pedestrian within 3 m of a moving forklift”
Then: SUPERVISOR PAGED · CLIP SEALED ✓
Open in the Rule PlaygroundBlocked exits
“Emergency exits and aisles stay clear at all times”
Then: SHIFT LEAD NOTIFIED · AUTO-CLEARED ✓
Open in the Rule PlaygroundDock dwell
“Flag trailers at a bay for more than 45 minutes”
Then: DOCK BOARD UPDATED · TREND LOGGED
Open in the Rule Playground
Measure · Step 2 of 4
Every alert becomes a number you manage.
What FloFusion measures for Warehousing, per zone, per site and over time.
Dock and bay use
How long each dock is occupied, by shift, against the slots you booked.
Dwell at bays
How long trucks, pallets and people stay, and which bays run over.
Near misses per 100 hours
People and forklifts too close, per hour watched, trending week on week.

What a pilot sets out to move
- more near-misses surfaced
- 5–10×
- forklift–pedestrian conflicts trended per zone
- fewer egress and aisle violations
- 30–50%
- typical pilot target
- dock and yard metrics
- Live
- dwell and utilization from existing cameras
Pilot targets agreed with you up front, not past results.

Comply · Step 3 of 4
Proof that holds up with auditors.
The rules that apply to Warehousing, scored continuously from camera evidence, with a signed record anyone can verify.
EU AI Act
AI used for workplace monitoring and safety is high-risk: you must run risk management, keep event logs, maintain technical documentation, and guarantee human oversight and accuracy monitoring.
EU OSH Framework Directive
Employers carry a general duty to prevent occupational risks and demonstrate systematic prevention measures.
UK GDPR and Data Protection Act 2018
Video of identifiable people is personal data: you need a lawful basis, transparency, data minimisation and retention limits, and a DPIA before systematic monitoring of staff.
ICO guidance on monitoring workers
Monitoring must be necessary, proportionate and open: tell workers what you monitor and why, consult them, choose the least intrusive means, and avoid covert monitoring.
Improve · Step 4 of 4
What to change next.
The process map shows where the floor loses time and where people and vehicles meet.
Re-time the dock slots
Spread arrivals off the peak the map shows, so bays stop queuing at shift change.
Separate the pedestrian route at bay 2
Move the walkway away from the forklift lane where near misses cluster.
Examples of what a pilot’s process map points to.

Getting started
A pilot on the cameras you own.
Prove detection quality and evidence-grade reporting in one facility, on your existing cameras: no model training, no rip-and-replace, live in days.
Scope
- Forklift–pedestrian conflict points in aisles and crossings
- Dock doors and staging for utilization and turnaround
- Fire exits and emergency egress routes
- Perimeter and after-hours exception zones
We configure
- Your safety policies written as plain-English rules, no per-site model tuning
- FloFrame on-prem inference, so video never leaves your facility
- AI explanations that narrate each event in your own policy language
- Alert routing to shift leads and safety managers, with audit-ready reporting in FloFusion
You walk away with
- Measurable reduction in proximity conflicts and blocked-exit incidents
- AI Copilot for labor efficiency, congestion analytics, and yard visibility
- Compliance evidence for EU AI Act, Saudi PDPL residency, and brand ESG audits
Questions
Warehousing: common questions.
How is this different from the alerting tools we already get pitched?
Most tools stop at the alert. Camnitive detects forklift near-misses, blocked exits and dock exceptions, measures them, scores them against your packs and seals them as evidence. Then it shows what to change next.
Link to this questionDo we need to replace our cameras or install new hardware everywhere?
No. FloFrame works with the RTSP and ONVIF cameras you already own, mixed brands included. Each site adds one FloFrame box with an NVIDIA GPU.
Link to this questionHow long does deployment take, and do you need to train models on our footage?
A pilot of 10–50 cameras usually goes live in days. People, forklifts, PPE, spills and blocked exits are standard detections, so there is no training on your footage.
Link to this questionWhere does our video and event data live?
On your sites. FloFrame processes video where it is recorded; only alerts, chosen evidence and measurements leave. FloFusion is hosted by Camnitive, or deployed privately in your own cloud or data centre.
Link to this questionWhich warehouse use cases do customers start with?
Forklift and pedestrian proximity, blocked exits and aisle safety to detect; dock dwell and congestion to measure. Packs score the safety side, and the trends point to the layout or shift change worth making.
Link to this questionCan we standardize policies across multiple facilities?
Yes. FloFusion policies are versioned and roll out to a pilot site first, then the network, with zones adjusted per layout. Every site reports against the same standard.
Link to this questionHow does this play with 3PL clients and insurers?
Scores and sealed evidence per site, shift and zone become proof of duty of care. Share scores with a client by consent, or give an insurer a link to the signed record.
Link to this questionWhat happens if a site loses its internet connection?
Detection, rules and outputs on site keep running. Alerts wait on the device and go up when the link returns, over outbound HTTPS on port 443.
Link to this questionSee it on your own cameras.
A demo on footage from an operation like yours, then a pilot on the cameras you own.
