Buildings & public sector · Construction
Site safety you can show the auditor, not just the supervisor.
PPE compliance, exclusion zones, fall detection, and subcontractor accountability: audit-grade site safety evidence from the cameras already on your jobsites.
In construction
What goes wrong today.
Subcontractor churn resets safety culture weekly
New crews arrive every phase. Inductions fade fast, and enforcement depends on whichever foreman is nearby.
Crane radii and edges are enforced by shouting
Exclusion zones move daily with the work. Physical barriers and spotters cannot keep up with the site.
Disputes and claims come without evidence
When an incident becomes a claim, the footage is gone, overwritten, or never captured the right angle.
Detect · Step 1 of 4
What the cameras watch for.
Works with temporary site cameras and 4G backhaul: coverage moves as the site does, phase by phase.
Sealed evidence
Harlow Bridge Construction
Demo footage, annotated the way FloFrame does. Each card appears as its alert is raised.
PPE compliance
Hard hats, hi-vis vests, and harnesses checked continuously.
Exclusion zones
Crane radii, edges, and excavations enforced automatically.
Fall / man-down detection
Immediate alerts on falls and downed workers, and on anyone at an open edge or floor opening.
Equipment proximity
People kept clear of moving plant and machinery.
Subcontractor compliance
Per-contractor safety scorecards and evidence.
Material staging
Laydown areas and access routes kept clear.
Rules
Rules you would run.
Written in plain words, run on site, checked by a vision model before anyone is alerted.
Work at height
“Harness clipped on for everyone working above 2 m”
Then: FOREMAN PAGED · CLIP SEALED ✓
Open in the Rule PlaygroundSuspended loads
“No one under a suspended load, ever”
Then: LIFT HALTED · SUPERVISOR PAGED
Open in the Rule PlaygroundMan-down detection
“Alert immediately if a worker is down for more than 10 seconds”
Then: EMERGENCY RESPONSE · CLIP SEALED ✓
Open in the Rule Playground
Measure · Step 2 of 4
Every alert becomes a number you manage.
What FloFusion measures for Construction, per zone, per site and over time.
PPE compliance by zone
Hard hats and hi-vis in each work zone, by contractor and shift.
Keep-clear breaches
People inside the keep-clear distance of a suspended load.
Crew at height
People on decks and scaffolds, against each platform’s limit.
What a pilot sets out to move
- fewer PPE violations
- 30–50%
- typical pilot target across covered zones
- more near-misses surfaced
- 5–10×
- trend data per zone and per contractor
- to pull sealed incident evidence
- Minutes
- for claims, disputes, and investigations
Pilot targets agreed with you up front, not past results.
Comply · Step 3 of 4
Proof that holds up with auditors.
The rules that apply to Construction, scored continuously from camera evidence, with a signed record anyone can verify.
EU AI Act
AI used for workplace monitoring and safety is high-risk: you must run risk management, keep event logs, maintain technical documentation, and guarantee human oversight and accuracy monitoring.
EU OSH Framework Directive
Employers carry a general duty to prevent occupational risks and demonstrate systematic prevention measures.
UK GDPR and Data Protection Act 2018
Video of identifiable people is personal data: you need a lawful basis, transparency, data minimisation and retention limits, and a DPIA before systematic monitoring of staff.
ICO guidance on monitoring workers
Monitoring must be necessary, proportionate and open: tell workers what you monitor and why, consult them, choose the least intrusive means, and avoid covert monitoring.
OSH Act general duty clause
Employers must keep the workplace free of recognised hazards likely to cause death or serious harm, on top of OSHA standards such as those for powered industrial trucks.
CCPA, as amended by the CPRA
Businesses above the thresholds must give notice at collection, limit use to the stated purposes, disclose retention and honour access and deletion requests, for employees as well as customers.
Improve · Step 4 of 4
What to change next.
The process map shows where the site takes its biggest risks, and when.
Exclusion during lifts at the landing
Clear the landing crew while loads pass, where breaches repeat.
A PPE station at the laydown gate
Hand out hi-vis where most missing-vest alerts start.
Examples of what a pilot’s process map points to.
Getting started
A pilot on the cameras you own.
Prove PPE, fall/man-down, and proximity detection at one site, on your existing cameras: no model training, no rip-and-replace, live in days.
Scope
- Active work areas for PPE, fall/man-down coverage, and unprotected-edge zones
- Equipment corridors and lift paths for proximity conflicts
- Material staging and laydown areas
- Perimeter and after-hours exception zones
We configure
- Your HSE policies written as plain-English rules, no per-site model tuning
- FloFrame on-prem inference, so video never leaves the site
- AI explanations that narrate each event in your own policy language
- Supervisor routing plus audit-ready reporting in FloFusion
You walk away with
- Measurable reduction in PPE and proximity violations in priority zones
- AI Copilot for progress tracking and subcontractor compliance scorecards
- Site risk scoring and compliance evidence for EU AI Act, Saudi PDPL, and brand ESG audits
Questions
Construction: common questions.
How is this different from the jobsite alerting tools we already use?
Alerts stop at the event. Camnitive goes on: it measures each one, scores it against the packs you choose, and seals it as evidence, so the same alert serves the site team, the client and the auditor.
Link to this questionDo we need new cameras or per-site model training?
Neither. FloFrame works with the site cameras you already have, and PPE, falls, edges and plant proximity are standard detections. A pilot of 10–50 cameras usually goes live in days.
Link to this questionHow does Camnitive handle constantly changing jobsites?
Zones and rules are settings, not training. Redraw a zone or change a rule in minutes as work areas, perimeters and crews move.
Link to this questionWhere does our video and event data live?
On your sites. FloFrame processes video where it is recorded; only alerts, chosen evidence and measurements leave. FloFusion is hosted by Camnitive, or deployed privately in your own cloud or data centre.
Link to this questionWhich construction use cases do teams start with?
PPE, falls and man-down, unprotected edges and plant proximity. Then they measure trends by zone and subcontractor, score them in a safety pack, and act on the repeat hotspots.
Link to this questionWhat evidence can we bring to HSE reviews, clients, and audits?
Trends by zone, shift and subcontractor, plus sealed evidence for every event and signed, hash-chained score snapshots. Safety meetings, client reports and audits work from the same record.
Link to this questionDo temporary jobsites need fixed connectivity?
No. FloFrame works over 4G, 5G or a temporary link, and keeps detecting through outages. It only needs an outbound connection on port 443 to send alerts when the link is up.
Link to this questionCan an alert sound a horn or light on site?
Yes. FloFrame drives outputs on site, such as HTTP or ONVIF relays, Modbus TCP and MQTT. It is an aid next to your certified safety systems.
Link to this questionSee it on your own cameras.
A demo on footage from an operation like yours, then a pilot on the cameras you own.